由于冬天氣溫比較低，很多裝載機啟動時需要費很大功夫，這就需要大家在裝載機啟動前做好檢查工作，以便節省時間。
Due to low winter temperatures, takes too much effort Many loaders start, which we need to carry out inspection work before the loader starts, in order to save time.
  
1、檢查裝載機電壓不足或蓄電池是否損壞，如有該情況應該及時充電或更換新蓄電池；
Check the battery voltage is insufficient or loader is damaged, if the situation should be promptly charged or replaced with new batteries;
 
2、檢查啟動開關是否損壞，檢修一下或者更換新啟動開關；
Check whether the start switch is damaged, repair or replace a new look at the start switch；
  
3、檢查線路是否接觸不良或斷路，檢查修復一下斷路的電路；
Check whether the line is bad or open circuit, check the circuit breaker repair look;
  
4、發動機管路中如果有空氣，就需要排除管路中的空氣；
If there is air in the engine pipeline, the pipeline would need to exclude the air;

濟南裝載機：http://www.hpize.cn/