濟南裝載機http://www.hpize.cn/液壓缸里面如果出現(xiàn)故障就會給我們的使用帶來阻礙，下面永保機械的專家給大家詳細分析一下裝載機液壓缸內(nèi)漏部位如何確定?

將濟南裝載機動臂落到底，然后啟動發(fā)動機（機器處于空擋位置），將動臂操縱桿置于下降位置，加大油門根據(jù)松開動臂缸大腔接口處的漏油情況即可判斷小腔油封的好壞。
Jinan loading motor arm drop to the bottom, and then start the engine (machine is in a neutral position), boom lever is arranged in the lowered position, increase the throttle to loosen the boom cylinder cavity interface oil can be judged cavity seal is good or bad.

若濟南裝載機http://www.hpize.cn/大腔接口處漏油比較多，則說明該缸油封密封不良或油封損壞；若松開處接口不漏油可漏油很少，則說明該動臂缸小腔油封密封性能較好。大腔油封損壞，就會造成升起的動臂自動下落，其判斷方法與小腔油封判定方法相反。
If Jinan loading machine cavity interface leakage more, then the cylinder seal sealing oil seal is bad or damaged; if undo interface does not leak oil can leak rarely, the boom cylinder cavity seal sealing performance is better. The large cavity oil seal is damaged, it will cause the rising boom automatically fall, the judgment method and determination method of opposite seal cavity.