永保機械裝載機之所以受大家歡迎，是因為永保機械選用了技術成熟的配套部件，動力匹配合理，結構先進，視野開闊，油耗低，功率大，克服障礙能力強。那么永保機械使用時有哪些技巧呢？

1、永保機械在作業中，油門始終要穩住。一般作業狀態下，油門開度在70%左右為宜。
Holding on machinery in operation, the throttle should always hold. Under normal operating condition, the throttle opening is appropriate at around 70%.
2、特別是在鏟挖作業時，永保機械應在油門穩定情況下，用循環扳動起升和轉斗操縱桿的方法使鏟斗鏟滿物料。
Especially when shoveling job forever machinery should stabilize the situation in the throttle, with the lifting loop and pulling the lever method turn the bucket shovel bucket full of materials.
3、腳跟緊抵駕駛室地板，腳板和油門踏板保持平行，輕緩地下壓加油踏板。
Heel tight against the cab floor, feet and parallel to the accelerator pedal, the pedal gently underground pressure refueling.
4、協調就是起升和轉斗操縱杠有機的配合。永保機械一般的鏟挖過程首先是將鏟斗平放在地面，平穩地駛向料堆。在鏟斗平行鏟往料堆遇阻力時，首先應遵循先起臂后收斗的原則。這樣可以有效地避免鏟斗底部受到阻力，從而能夠充分發揮最大的掘起力。
Coordination is lifting the bar of organic and genetically manipulated fighting fit. Eternal mechanical shovel to dig a general process is the bucket flat on the first floor, smooth sail stockpile. In parallel with the shovel bucket to stockpile in case of resistance, the first principle should be followed after the first arm received from the bucket. This can effectively avoid the bottom of the bucket by the resistance, which can give full play to the maximum breakout force.

我們永保機械裝載機采用直噴柴油機為動力，易啟動，耗油低，底盤采用鉸接式結構，轉彎半徑小，轉向靈活，適用于狹小空間作業。歡迎大家前來選購。